tahoma2d/toonz/sources/translations_docs/english/WarpHVIno.tex

70 lines
No EOL
2 KiB
TeX

\documentclass[a4paper,12pt]{article}
\usepackage[a4paper, total={180mm, 272mm}]{geometry}
\usepackage{fontspec}
\setmainfont[Path=fonts/, Extension=.ttf]{ipaexm}
\setlength\parindent{3.5em}
\setlength\parskip{0em}
\renewcommand{\baselinestretch}{1.247}
\begin{document}
\thispagestyle{empty}
\Large
\noindent \\
Warp HV Ino\medskip
\par
\normalsize
Distort the picture based on the reference image.\\
\\
-{-}- \ Inputs \ -{-}-\\
Source\par
Connect the image to process.\\
Hori\par
Connect the reference image to distort in the horizontal direction.\\
Vert\par
Connect the reference image to distort in the vertical direction.\\
\\
-{-}- \ Settings \ -{-}-\\
H MaxLen\par
This distorts the picture in the horizontal direction.\par
Specify the maximum value of the distortion.\par
The unit is mm, you can give a value from 0 to 100.\par
Please set a value since the default value of 0 will not make any changes.\\
\par
\textquotedbl Hori\textquotedbl \ the red value of the reference image determines the distortion of each pixel.\par
8bits Image\par
\noindent \hskip 7em 1 distortion-MaxLen(mm)\par
\noindent \hskip 7em 128 without distortion\par
\noindent \hskip 7em 255 distortion MaxLen(mm)\par
16bits Image\par
\noindent \hskip 7em 1 distortion-MaxLen(mm)\par
\noindent \hskip 7em 32768 without distortion\par
\noindent \hskip 7em 65535 distortion MaxLen(mm)\par
Will produce the distortion.\\
\\
V MaxLen\par
This distorts the picture in the vertical direction.\par
\textquotedbl Vert\textquotedbl \ the red value of the reference image determines the distortion of each pixel.\par
Options are the same as \textquotedbl H MaxLen\textquotedbl .\\
\\
Alpha Rendering\par
When OFF it does not do anything to the Alpha channel.\par
When ON it will also process to the Alpha channel.\par
The default setting is ON.\\
\\
Anti Aliasing\par
When OFF it will maintain the jaggies in the picture.
\newpage
\thispagestyle{empty}
\ \vspace{-0.2em}
\par
When ON it will process the picture to remove jaggies.\par
The default setting is ON.
\end{document}