\documentclass[a4paper,12pt]{article} \usepackage[a4paper, total={180mm, 272mm}]{geometry} \usepackage{fontspec} \setmainfont[Path=fonts/, Extension=.ttf]{ipaexm} \setlength\parindent{3.5em} \setlength\parskip{0em} \renewcommand{\baselinestretch}{1.247} \begin{document} \thispagestyle{empty} \Large \noindent \\ Warp HV Ino\medskip \par \normalsize Distort the picture based on the reference image.\\ \\ -{-}- \ Inputs \ -{-}-\\ Source\par Connect the image to process.\\ Hori\par Connect the reference image to distort in the horizontal direction.\\ Vert\par Connect the reference image to distort in the vertical direction.\\ \\ -{-}- \ Settings \ -{-}-\\ H MaxLen\par This distorts the picture in the horizontal direction.\par Specify the maximum value of the distortion.\par The unit is mm, you can give a value from 0 to 100.\par Please set a value since the default value of 0 will not make any changes.\\ \par \textquotedbl Hori\textquotedbl \ the red value of the reference image determines the distortion of each pixel.\par 8bits Image\par \noindent \hskip 7em 1 distortion-MaxLen(mm)\par \noindent \hskip 7em 128 without distortion\par \noindent \hskip 7em 255 distortion MaxLen(mm)\par 16bits Image\par \noindent \hskip 7em 1 distortion-MaxLen(mm)\par \noindent \hskip 7em 32768 without distortion\par \noindent \hskip 7em 65535 distortion MaxLen(mm)\par Will produce the distortion.\\ \\ V MaxLen\par This distorts the picture in the vertical direction.\par \textquotedbl Vert\textquotedbl \ the red value of the reference image determines the distortion of each pixel.\par Options are the same as \textquotedbl H MaxLen\textquotedbl .\\ \\ Alpha Rendering\par When OFF it does not do anything to the Alpha channel.\par When ON it will also process to the Alpha channel.\par The default setting is ON.\\ \\ Anti Aliasing\par When OFF it will maintain the jaggies in the picture. \newpage \thispagestyle{empty} \ \vspace{-0.2em} \par When ON it will process the picture to remove jaggies.\par The default setting is ON. \end{document}