# Configuring the ntfy server The ntfy server can be configured in three ways: using a config file (typically at `/etc/ntfy/server.yml`, see [server.yml](https://github.com/binwiederhier/ntfy/blob/main/config/server.yml)), via command line arguments or using environment variables. ## Quick start By default, simply running `ntfy serve` will start the server at port 80. No configuration needed. Batteries included 😀. If everything works as it should, you'll see something like this: ``` $ ntfy serve 2021/11/30 19:59:08 Listening on :80 ``` You can immediately start [publishing messages](publish.md), or subscribe via the [Android app](subscribe/phone.md), [the web UI](subscribe/web.md), or simply via [curl or your favorite HTTP client](subscribe/api.md). To configure the server further, check out the [config options table](#config-options) or simply type `ntfy --help` to get a list of [command line options](#command-line-options). ## Message cache If desired, ntfy can temporarily keep notifications in an in-memory or an on-disk cache. Caching messages for a short period of time is important to allow [phones](subscribe/phone.md) and other devices with brittle Internet connections to be able to retrieve notifications that they may have missed. By default, ntfy keeps messages **in-memory for 12 hours**, which means that **cached messages do not survive an application restart**. You can override this behavior using the following config settings: * `cache-file`: if set, ntfy will store messages in a SQLite based cache (default is empty, which means in-memory cache). **This is required if you'd like messages to be retained across restarts**. * `cache-duration`: defines the duration for which messages are stored in the cache (default is `12h`). You can also entirely disable the cache by setting `cache-duration` to `0`. When the cache is disabled, messages are only passed on to the connected subscribers, but never stored on disk or even kept in memory longer than is needed to forward the message to the subscribers. Subscribers can retrieve cached messaging using the [`poll=1` parameter](subscribe/api.md#poll-for-messages), as well as the [`since=` parameter](subscribe/api.md#fetch-cached-messages). ## E-mail notifications To allow forwarding messages via e-mail, you can configure an **SMTP server for outgoing messages**. Once configured, you can set the `X-Email` header to [send messages via e-mail](publish.md#e-mail-notifications) (e.g. `curl -d "hi there" -H "X-Email: phil@example.com" ntfy.sh/mytopic`). As of today, only SMTP servers with PLAIN auth and STARTLS are supported. To enable e-mail sending, you must set the following settings: * `base-url` is the root URL for the ntfy server; this is needed for e-mail footer * `smtp-sender-addr` is the hostname:port of the SMTP server * `smtp-sender-user` and `smtp-sender-pass` are the username and password of the SMTP user * `smtp-sender-from` is the e-mail address of the sender Here's an example config using [Amazon SES](https://aws.amazon.com/ses/) for outgoing mail (this is how it is configured for `ntfy.sh`): === "/etc/ntfy/server.yml" ``` yaml base-url: "https://ntfy.sh" smtp-sender-addr: "email-smtp.us-east-2.amazonaws.com:587" smtp-sender-user: "AKIDEADBEEFAFFE12345" smtp-sender-pass: "Abd13Kf+sfAk2DzifjafldkThisIsNotARealKeyOMG." smtp-sender-from: "ntfy@ntfy.sh" ``` Please also refer to the [rate limiting](#rate-limiting) settings below, specifically `visitor-email-limit-burst` and `visitor-email-limit-burst`. Setting these conservatively is necessary to avoid abuse. ## E-mail publishing To allow publishing messages via e-mail, ntfy can run a lightweight **SMTP server for incoming messages**. Once configured, users can [send emails to a topic e-mail address](publish.md#e-mail-publishing) (e.g. `mytopic@ntfy.sh` or `myprefix-mytopic@ntfy.sh`) to publish messages to a topic. This is useful for e-mail based integrations such as for statuspage.io (though these days most services also support webhooks and HTTP calls). To configure the SMTP server, you must at least set `smtp-server-listen` and `smtp-server-domain`: * `smtp-server-listen` defines the IP address and port the SMTP server will listen on, e.g. `:25` or `1.2.3.4:25` * `smtp-server-domain` is the e-mail domain, e.g. `ntfy.sh` * `smtp-server-addr-prefix` is an optional prefix for the e-mail addresses to prevent spam. If set to `ntfy-`, for instance, only e-mails to `ntfy-$topic@ntfy.sh` will be accepted. If this is not set, all emails to `$topic@ntfy.sh` will be accepted (which may obviously be a spam problem). Here's an example config (this is how it is configured for `ntfy.sh`): === "/etc/ntfy/server.yml" ``` yaml smtp-server-listen: ":25" smtp-server-domain: "ntfy.sh" smtp-server-addr-prefix: "ntfy-" ``` In addition to configuring the ntfy server, you have to create two DNS records (an [MX record](https://en.wikipedia.org/wiki/MX_record) and a corresponding A record), so incoming mail will find its way to your server. Here's an example of how `ntfy.sh` is configured (in [Amazon Route 53](https://aws.amazon.com/route53/)):
![DNS records for incoming mail](static/img/screenshot-email-publishing-dns.png){ width=600 }
DNS records for incoming mail
## Behind a proxy (TLS, etc.) !!! warning If you are running ntfy behind a proxy, you must set the `behind-proxy` flag. Otherwise, all visitors are [rate limited](#rate-limiting) as if they are one. It may be desirable to run ntfy behind a proxy (e.g. nginx, HAproxy or Apache), so you can provide TLS certificates using Let's Encrypt using certbot, or simply because you'd like to share the ports (80/443) with other services. Whatever your reasons may be, there are a few things to consider. If you are running ntfy behind a proxy, you should set the `behind-proxy` flag. This will instruct the [rate limiting](#rate-limiting) logic to use the `X-Forwarded-For` header as the primary identifier for a visitor, as opposed to the remote IP address. If the `behind-proxy` flag is not set, all visitors will be counted as one, because from the perspective of the ntfy server, they all share the proxy's IP address. === "/etc/ntfy/server.yml" ``` yaml # Tell ntfy to use "X-Forwarded-For" to identify visitors behind-proxy: true ``` ### TLS/SSL ntfy supports HTTPS/TLS by setting the `listen-https` [config option](#config-options). However, if you are behind a proxy, it is recommended that TLS/SSL termination is done by the proxy itself (see below). I highly recommend using [certbot](https://certbot.eff.org/). I use it with the [dns-route53 plugin](https://certbot-dns-route53.readthedocs.io/en/stable/), which lets you use [AWS Route 53](https://aws.amazon.com/route53/) as the challenge. That's much easier than using the HTTP challenge. I've found [this guide](https://nandovieira.com/using-lets-encrypt-in-development-with-nginx-and-aws-route53) to be incredibly helpful. ### nginx/Apache2 For your convenience, here's a working config that'll help configure things behind a proxy. In this example, ntfy runs on `:2586` and we proxy traffic to it. We also redirect HTTP to HTTPS for GET requests against a topic or the root domain: === "nginx (/etc/nginx/sites-*/ntfy)" ``` server { listen 80; server_name ntfy.sh; location / { # Redirect HTTP to HTTPS, but only for GET topic addresses, since we want # it to work with curl without the annoying https:// prefix set $redirect_https ""; if ($request_method = GET) { set $redirect_https "yes"; } if ($request_uri ~* "^/[-_a-z0-9]{0,64}$") { set $redirect_https "${redirect_https}yes"; } if ($redirect_https = "yesyes") { return 302 https://$http_host$request_uri$is_args$query_string; } proxy_pass http://127.0.0.1:2586; proxy_http_version 1.1; proxy_buffering off; proxy_redirect off; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_connect_timeout 1m; proxy_send_timeout 1m; proxy_read_timeout 1m; } } server { listen 443 ssl; server_name ntfy.sh; ssl_session_cache builtin:1000 shared:SSL:10m; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers HIGH:!aNULL:!eNULL:!EXPORT:!CAMELLIA:!DES:!MD5:!PSK:!RC4; ssl_prefer_server_ciphers on; ssl_certificate /etc/letsencrypt/live/ntfy.sh/fullchain.pem; ssl_certificate_key /etc/letsencrypt/live/ntfy.sh/privkey.pem; location / { proxy_pass http://127.0.0.1:2586; proxy_http_version 1.1; proxy_buffering off; proxy_redirect off; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_connect_timeout 1m; proxy_send_timeout 1m; proxy_read_timeout 1m; } } ``` === "Apache2 (/etc/apache2/sites-*/ntfy.conf)" ``` ServerName ntfy.sh SetEnv proxy-nokeepalive 1 SetEnv proxy-sendchunked 1 ProxyPass / http://127.0.0.1:2586/ ProxyPassReverse / http://127.0.0.1:2586/ # Higher than the max message size of 512k LimitRequestBody 102400 # Redirect HTTP to HTTPS, but only for GET topic addresses, since we want # it to work with curl without the annoying https:// prefix RewriteEngine on RewriteCond %{REQUEST_METHOD} GET RewriteRule ^/([-_A-Za-z0-9]{0,64})$ https://%{SERVER_NAME}/$1 [R,L] ServerName ntfy.sh SSLEngine on SSLCertificateFile /etc/letsencrypt/live/ntfy.sh/fullchain.pem SSLCertificateKeyFile /etc/letsencrypt/live/ntfy.sh/privkey.pem Include /etc/letsencrypt/options-ssl-apache.conf SetEnv proxy-nokeepalive 1 SetEnv proxy-sendchunked 1 ProxyPass / http://127.0.0.1:2586/ ProxyPassReverse / http://127.0.0.1:2586/ # Higher than the max message size of 512k LimitRequestBody 102400 # Redirect HTTP to HTTPS, but only for GET topic addresses, since we want # it to work with curl without the annoying https:// prefix RewriteEngine on RewriteCond %{REQUEST_METHOD} GET RewriteRule ^/([-_A-Za-z0-9]{0,64})$ https://%{SERVER_NAME}/$1 [R,L] ``` ## Firebase (FCM) !!! info Using Firebase is **optional** and only works if you modify and [build your own Android .apk](develop.md#android-app). For a self-hosted instance, it's easier to just not bother with FCM. [Firebase Cloud Messaging (FCM)](https://firebase.google.com/docs/cloud-messaging) is the Google approved way to send push messages to Android devices. FCM is the only method that an Android app can receive messages without having to run a [foreground service](https://developer.android.com/guide/components/foreground-services). For the main host [ntfy.sh](https://ntfy.sh), the [ntfy Android app](subscribe/phone.md) uses Firebase to send messages to the device. For other hosts, instant delivery is used and FCM is not involved. To configure FCM for your self-hosted instance of the ntfy server, follow these steps: 1. Sign up for a [Firebase account](https://console.firebase.google.com/) 2. Create a Firebase app and download the key file (e.g. `myapp-firebase-adminsdk-...json`) 3. Place the key file in `/etc/ntfy`, set the `firebase-key-file` in `server.yml` accordingly and restart the ntfy server 4. Build your own Android .apk following [these instructions](develop.md#android-app) Example: ``` # If set, also publish messages to a Firebase Cloud Messaging (FCM) topic for your app. # This is optional and only required to support Android apps (which don't allow background services anymore). # firebase-key-file: "/etc/ntfy/ntfy-sh-firebase-adminsdk-ahnce-9f4d6f14b5.json" ``` ## Rate limiting !!! info Be aware that if you are running ntfy behind a proxy, you must set the `behind-proxy` flag. Otherwise, all visitors are rate limited as if they are one. By default, ntfy runs without authentication, so it is vitally important that we protect the server from abuse or overload. There are various limits and rate limits in place that you can use to configure the server. Let's do the easy ones first: * `global-topic-limit` defines the total number of topics before the server rejects new topics. It defaults to 5000. * `visitor-subscription-limit` is the number of subscriptions (open connections) per visitor. This value defaults to 30. A **visitor** is identified by its IP address (or the `X-Forwarded-For` header if `behind-proxy` is set). All config options that start with the word `visitor` apply only on a per-visitor basis. In addition to the limits above, there is a requests/second limit per visitor for all sensitive GET/PUT/POST requests. This limit uses a [token bucket](https://en.wikipedia.org/wiki/Token_bucket) (using Go's [rate package](https://pkg.go.dev/golang.org/x/time/rate)): Each visitor has a bucket of 60 requests they can fire against the server (defined by `visitor-request-limit-burst`). After the 60, new requests will encounter a `429 Too Many Requests` response. The visitor request bucket is refilled at a rate of one request every 10s (defined by `visitor-request-limit-replenish`) * `visitor-request-limit-burst` is the initial bucket of requests each visitor has. This defaults to 60. * `visitor-request-limit-replenish` is the rate at which the bucket is refilled (one request per x). Defaults to 10s. Similarly to the request limit, there is also an e-mail limit (only relevant if [e-mail notifications](#e-mail-notifications) are enabled): * `visitor-email-limit-burst` is the initial bucket of emails each visitor has. This defaults to 16. * `visitor-email-limit-replenish` is the rate at which the bucket is refilled (one email per x). Defaults to 1h. During normal usage, you shouldn't encounter these limits at all, and even if you burst a few requests or emails (e.g. when you reconnect after a connection drop), it shouldn't have any effect. ## Tuning for scale If you're running ntfy for your home server, you probably don't need to worry about scale at all. In its default config, if it's not behind a proxy, the ntfy server can keep about **as many connections as the open file limit allows**. This limit is typically called `nofile`. Other than that, RAM and CPU are obviously relevant. You may also want to check out [this discussion on Reddit](https://www.reddit.com/r/golang/comments/r9u4ee/how_many_actively_connected_http_clients_can_a_go/). Depending on *how you run it*, here are a few limits that are relevant: ### For systemd services If you're running ntfy in a systemd service (e.g. for .deb/.rpm packages), the main limiting factor is the `LimitNOFILE` setting in the systemd unit. The default open files limit for `ntfy.service` is 10000. You can override it by creating a `/etc/systemd/system/ntfy.service.d/override.conf` file. As far as I can tell, `/etc/security/limits.conf` is not relevant. === "/etc/systemd/system/ntfy.service.d/override.conf" ``` # Allow 20,000 ntfy connections (and give room for other file handles) [Service] LimitNOFILE=20500 ``` ### Outside of systemd If you're running outside systemd, you may want to adjust your `/etc/security/limits.conf` file to increase the `nofile` setting. Here's an example that increases the limit to 5000. You can find out the current setting by running `ulimit -n`, or manually override it temporarily by running `ulimit -n 50000`. === "/etc/security/limits.conf" ``` # Increase open files limit globally * hard nofile 20500 ``` ### Proxy limits (nginx, Apache2) If you are running [behind a proxy](#behind-a-proxy-tls-etc) (e.g. nginx, Apache), the open files limit of the proxy is also relevant. So if your proxy runs inside of systemd, increase the limits in systemd for the proxy. Typically, the proxy open files limit has to be **double the number of how many connections you'd like to support**, because the proxy has to maintain the client connection and the connection to ntfy. === "/etc/nginx/nginx.conf" ``` events { # Allow 40,000 proxy connections (2x of the desired ntfy connection count; # and give room for other file handles) worker_connections 40500; } ``` === "/etc/systemd/system/nginx.service.d/override.conf" ``` # Allow 40,000 proxy connections (2x of the desired ntfy connection count; # and give room for other file handles) [Service] LimitNOFILE=40500 ``` ## Config options Each config option can be set in the config file `/etc/ntfy/server.yml` (e.g. `listen-http: :80`) or as a CLI option (e.g. `--listen-http :80`. Here's a list of all available options. Alternatively, you can set an environment variable before running the `ntfy` command (e.g. `export NTFY_LISTEN_HTTP=:80`). | Config option | Env variable | Format | Default | Description | |---|---|---|---|---| | `base-url` | `NTFY_BASE_URL` | *URL* | - | Public facing base URL of the service (e.g. `https://ntfy.sh`) | | `listen-http` | `NTFY_LISTEN_HTTP` | `[host]:port` | `:80` | Listen address for the HTTP web server | | `listen-https` | `NTFY_LISTEN_HTTPS` | `[host]:port` | - | Listen address for the HTTPS web server. If set, you also need to set `key-file` and `cert-file`. | | `key-file` | `NTFY_KEY_FILE` | *filename* | - | HTTPS/TLS private key file, only used if `listen-https` is set. | | `cert-file` | `NTFY_CERT_FILE` | *filename* | - | HTTPS/TLS certificate file, only used if `listen-https` is set. | | `firebase-key-file` | `NTFY_FIREBASE_KEY_FILE` | *filename* | - | If set, also publish messages to a Firebase Cloud Messaging (FCM) topic for your app. This is optional and only required to save battery when using the Android app. See [Firebase (FCM](#firebase-fcm). | | `cache-file` | `NTFY_CACHE_FILE` | *filename* | - | If set, messages are cached in a local SQLite database instead of only in-memory. This allows for service restarts without losing messages in support of the since= parameter. See [message cache](#message-cache). | | `cache-duration` | `NTFY_CACHE_DURATION` | *duration* | 12h | Duration for which messages will be buffered before they are deleted. This is required to support the `since=...` and `poll=1` parameter. Set this to `0` to disable the cache entirely. | | `behind-proxy` | `NTFY_BEHIND_PROXY` | *bool* | false | If set, the X-Forwarded-For header is used to determine the visitor IP address instead of the remote address of the connection. | | `smtp-addr` | `NTFY_SMTP_ADDR` | `host:port` | - | SMTP server address to allow email sending | | `smtp-user` | `NTFY_SMTP_USER` | *string* | - | SMTP user; only used if e-mail sending is enabled | | `smtp-pass` | `NTFY_SMTP_PASS` | *string* | - | SMTP password; only used if e-mail sending is enabled | | `smtp-from` | `NTFY_SMTP_FROM` | *e-mail address* | - | SMTP sender e-mail address; only used if e-mail sending is enabled | | `keepalive-interval` | `NTFY_KEEPALIVE_INTERVAL` | *duration* | 30s | Interval in which keepalive messages are sent to the client. This is to prevent intermediaries closing the connection for inactivity. Note that the Android app has a hardcoded timeout at 77s, so it should be less than that. | | `manager-interval` | `$NTFY_MANAGER_INTERVAL` | *duration* | 1m | Interval in which the manager prunes old messages, deletes topics and prints the stats. | | `global-topic-limit` | `NTFY_GLOBAL_TOPIC_LIMIT` | *number* | 5000 | Rate limiting: Total number of topics before the server rejects new topics. | | `visitor-subscription-limit` | `NTFY_VISITOR_SUBSCRIPTION_LIMIT` | *number* | 30 | Rate limiting: Number of subscriptions per visitor (IP address) | | `visitor-request-limit-burst` | `NTFY_VISITOR_REQUEST_LIMIT_BURST` | *number* | 60 | Allowed GET/PUT/POST requests per second, per visitor. This setting is the initial bucket of requests each visitor has | | `visitor-request-limit-replenish` | `NTFY_VISITOR_REQUEST_LIMIT_REPLENISH` | *duration* | 10s | Strongly related to `visitor-request-limit-burst`: The rate at which the bucket is refilled | | `visitor-email-limit-burst` | `NTFY_VISITOR_EMAIL_LIMIT_BURST` | *number* | 16 |Initial limit of e-mails per visitor | | `visitor-email-limit-replenish` | `NTFY_VISITOR_EMAIL_LIMIT_REPLENISH` | *duration* | 1h | Strongly related to `visitor-email-limit-burst`: The rate at which the bucket is refilled | The format for a *duration* is: `(smh)`, e.g. 30s, 20m or 1h. ## Command line options ``` $ ntfy serve --help NAME: ntfy serve - Run the ntfy server USAGE: ntfy serve [OPTIONS..] DESCRIPTION: Run the ntfy server and listen for incoming requests The command will load the configuration from /etc/ntfy/server.yml. Config options can be overridden using the command line options. Examples: ntfy serve # Starts server in the foreground (on port 80) ntfy serve --listen-http :8080 # Starts server with alternate port OPTIONS: --config value, -c value config file (default: /etc/ntfy/server.yml) [$NTFY_CONFIG_FILE] --base-url value, -B value externally visible base URL for this host (e.g. https://ntfy.sh) [$NTFY_BASE_URL] --listen-http value, -l value ip:port used to as HTTP listen address (default: ":80") [$NTFY_LISTEN_HTTP] --listen-https value, -L value ip:port used to as HTTPS listen address [$NTFY_LISTEN_HTTPS] --key-file value, -K value private key file, if listen-https is set [$NTFY_KEY_FILE] --cert-file value, -E value certificate file, if listen-https is set [$NTFY_CERT_FILE] --firebase-key-file value, -F value Firebase credentials file; if set additionally publish to FCM topic [$NTFY_FIREBASE_KEY_FILE] --cache-file value, -C value cache file used for message caching [$NTFY_CACHE_FILE] --cache-duration since, -b since buffer messages for this time to allow since requests (default: 12h0m0s) [$NTFY_CACHE_DURATION] --keepalive-interval value, -k value interval of keepalive messages (default: 30s) [$NTFY_KEEPALIVE_INTERVAL] --manager-interval value, -m value interval of for message pruning and stats printing (default: 1m0s) [$NTFY_MANAGER_INTERVAL] --smtp-addr value SMTP server address (host:port) to allow email sending [$NTFY_SMTP_ADDR] --smtp-user value SMTP user (if e-mail sending is enabled) [$NTFY_SMTP_USER] --smtp-pass value SMTP password (if e-mail sending is enabled) [$NTFY_SMTP_PASS] --smtp-from value SMTP sender address (if e-mail sending is enabled) [$NTFY_SMTP_FROM] --global-topic-limit value, -T value total number of topics allowed (default: 5000) [$NTFY_GLOBAL_TOPIC_LIMIT] --visitor-subscription-limit value number of subscriptions per visitor (default: 30) [$NTFY_VISITOR_SUBSCRIPTION_LIMIT] --visitor-request-limit-burst value initial limit of requests per visitor (default: 60) [$NTFY_VISITOR_REQUEST_LIMIT_BURST] --visitor-request-limit-replenish value interval at which burst limit is replenished (one per x) (default: 10s) [$NTFY_VISITOR_REQUEST_LIMIT_REPLENISH] --visitor-email-limit-burst value initial limit of e-mails per visitor (default: 16) [$NTFY_VISITOR_EMAIL_LIMIT_BURST] --visitor-email-limit-replenish value interval at which burst limit is replenished (one per x) (default: 1h0m0s) [$NTFY_VISITOR_EMAIL_LIMIT_REPLENISH] --behind-proxy, -P if set, use X-Forwarded-For header to determine visitor IP address (for rate limiting) (default: false) [$NTFY_BEHIND_PROXY] --help, -h show help (default: false) ```