# Kernel developer PGP guide Updated: 2018-01-22 *Status: CURRENT, BETA* ### Target audience This document is aimed at Linux kernel developers, and especially subsystem maintainers. It contains a subset of information discussed in the more general "Protecting Code Integrity" guide found in the same repository. If you are not a Linux kernel developer, you should read the more general guide instead. This document covers the following topics: 1. How to improve your PGP key security 2. When and how to use PGP with git 3. How to properly use the Web of Trust ### Structure Each section is split into two areas: - A checklist of actionable items - Free-form list of considerations that explain what dictated these decisions, together with configuration instructions #### Checklist priority levels The items in each checklist include the priority level, which we hope will help guide your decision: - _(ESSENTIAL)_ items should definitely be high on the consideration list. If not implemented, they will introduce high risks to the code that gets committed to the kernel. - _(NICE)_ to have items will improve the overall security, but will affect how you interact with your work environment, and probably require learning new habits or unlearning old ones. Remember, these are only guidelines. If you feel these priority levels do not reflect your commitment to security, you should adjust them as you see fit. ## The role of PGP in Linux Kernel development PGP helps ensure the integrity of the code that is produced by the Linux Kernel development community and, to a lesser degree, establish trusted communication channels between members of the Linux Kernel development community. The Linux Kernel source code is available in two main formats: - Distributed source repositories (git) - Periodic release snapshots (tar) Both git repositories and tarballs carry PGP signatures of the kernel developers who are tasked with making official kernel releases. These signatures offer a cryptographic guarantee that downloadable versions made available via kernel.org or on its multiple worldwide mirrors are identical to what the developers have on their workstations. To this end: - git repositories provide PGP signatures on all tags - tarballs provide detached PGP signatures as separate downloads ### Trusting the developers, not infrastructure Ever since the 2011 compromise of core kernel.org systems, the main operating principle of the Kernel Archives project has been to assume that any part of the infrastructure can be compromised at any time. For this reason, the administrators have taken deliberate steps to emphasize that trust must always be placed with the developers and never with code hosting infrastructure, regardless of how good the security practices for the latter may be. This guiding principle is the reason why this guide is needed. We want to make sure that by placing trust into developers we do not simply shift the blame for future security incidents to someone else. The goal is to provide a set of guidelines developers can use to create a secure development environment and safeguard the very PGP keys used to establish the integrity of the Linux Kernel itself. ## PGP tools ### Checklist - [ ] Configure GnuPG to always use version 2 _(ESSENTIAL)_ - [ ] Configure gpg-agent options _(ESSENTIAL)_ - [ ] Set up a refresh cronjob _(ESSENTIAL)_ ### Considerations ### Installing GnuPG Your distributions should already have GnuPG installed, unless they are doing something horribly wrong. We just need to verify that you are using version 2.x and not the legacy 1.4 release. Unfortunately, most distributions still package both versions, with the default `gpg` command being from GnuPG v.1. To check, run: $ gpg --version If you see `gpg (GnuPG) 1.4.x`, then you are using GnuPG v.1. Try the `gpg2` command (if you don't have it, you may need to install the gnupg2 package): $ gpg2 --version If you see `gpg (GnuPG) 2.x.x`, then you are good to go. This guide will assume you have the version 2.2 of GnuPG (or later). If you are using version 2.0 of GnuPG, some of the commands in this guide will not work, and you should consider installing the latest 2.2 version of GnuPG. Most recent versions of gnupg-2.1 should be compatible for the purposes of this guide. ##### Making sure you always use GnuPG v.2 If you have both `gpg` and `gpg2` commands, you should make sure you are always using GnuPG v2, not the legacy version. You can make sure of this by setting the alias: $ alias gpg=gpg2 You can put that in your `.bashrc` to make sure it's always loaded whenever you use the gpg commands. #### Configure gpg-agent options The GnuPG agent is a helper tool that will start automatically whenever you use the `gpg` command and run in the background with the purpose of caching the private key passphrase. It is no longer necessary to start it manually at the beginning of your shell session. There are two options you should know in order to tweak when the passphrase should be expired from cache: - `default-cache-ttl` (seconds): If you use the same key again before the time-to-live expires, the countdown will reset for another period. The default is 600 (10 minutes). - `max-cache-ttl` (seconds): Regardless of how recently you've used the key since initial passphrase entry, if the maximum time-to-live countdown expires, you'll have to enter the passphrase again. The default is 30 minutes. If you find either of these defaults too short (or too long), you can edit your `~/.gnupg/gpg-agent.conf` file to set your own values: # set to 30 minutes for regular ttl, and 2 hours for max ttl default-cache-ttl 1800 max-cache-ttl 7200 #### Set up a refresh cronjob You will need to regularly refresh your keyring in order to get the latest changes on other people's public keys. You can set up a cronjob to do that: $ crontab -e Add the following on a new line: @daily /usr/bin/gpg2 --refresh >/dev/null 2>&1 **NOTE**: check the full path to your `gpg` or `gpg2` command and use the `gpg2` command if regular `gpg` for you is the legacy GnuPG v.1. ## Protecting your master PGP key ### Checklist - [ ] Understand the "master" key vs. subkeys _(ESSENTIAL)_ - [ ] Ensure your private key passphrase is strong _(ESSENTIAL)_ - [ ] Create a separate **[S]** subkey _(ESSENTIAL)_ - [ ] Back up the master key using paperkey _(ESSENTIAL)_ - [ ] Back up your whole `.gnupg` directory to encrypted media _(ESSENTIAL)_ ### Considerations This guide assumes that you already have a PGP key that you use for Linux Kernel development purposes. If you do not yet have one, please see the "Protecting Code Integrity" document in this repository for guidance on how to create one. You should make a new key if your current one is weaker than 2048 bits. #### Understanding the "Master" (Certify) key In this and next section we'll talk about the "master key" and "subkeys". It is important to understand the following: 1. There are no technical differences between the "master key" and "subkeys." 2. At creation time, we assign functional limitations to each key by giving it specific capabilities. 3. A PGP key can have 4 capabilities. - **[S]** key can be used for signing - **[E]** key can be used for encryption - **[A]** key can be used for authentication - **[C]** key can be used for certifying other keys 4. A single key may have multiple capabilities. The key carrying the **[C]** (certify) capability is considered the "master" key because it is the only key that can be used to indicate relationship with other keys. Only the **[C]** key can be used to: - add or revoke other keys (subkeys) with S/E/A capabilities - add, change or revoke identities (uids) associated with the key - add or change the expiration date on itself or any subkey - sign other people's keys for the web of trust purposes By default, GnuPG creates the following when generating new keys: - A master key carrying both Certify and Sign capabilities (**[SC]**) - A single subkey with the Encryption capability (**[E]**) If you used default parameters when generating your key, that is what you will have. You can verify by running `gpg --list-secret-keys`: sec rsa2048 2018-01-23 [SC] [expires: 2020-01-23] 000000000000000000000000AAAABBBBCCCCDDDD uid [ultimate] Ada Dev ssb rsa2048 2018-01-23 [E] [expires: 2020-01-23] Any key carrying the **[C]** capability is your master key, regardless of any other capabilities it may have. #### Ensure your passphrase is strong GnuPG uses passphrases to encrypt your private keys before storing them on disk. This way, even if your `.gnupg` directory is leaked or stolen in its entirety, the attackers cannot use your private keys without first obtaining the passphrase to decrypt them. It is absolutely essential that your private keys are protected by a strong passphrase. To set it or change it, use: $ gpg --change-passphrase [fpr] #### Create a separate Signing subkey Our goal is to protect your master key by moving it to offline media, so if you only have a combined **[SC]** key, then you should create a separate signing subkey. ##### RSA vs. ECC subkeys GnuPG v2 has full support for Elliptic Curve Cryptography, with ability to combine ECC subkeys with traditional RSA master keys. The main upside of ECC cryptography is that it is much faster computationally and creates much smaller signatures when comparing byte for byte with 2048+ RSA keys. Unless you plan on using a smartcard device that does not support ECC crypto, we recommend that you create an ECC signing subkey for your kernel work: $ gpg --quick-add-key [fpr] ed25519 sign If for some reason you prefer to stay with RSA subkeys, just replace "ed25519" with "rsa2048" in the above command. #### Back up your private keys The more signatures you have on your PGP key from other developers, the more reasons you have to create a backup version that lives on something other than digital media, for disaster recovery reasons. The best way to create a printable hardcopy of your private key is by using the `paperkey` software written for this very purpose. See `man paperkey` for more details on the output format and its benefits over other solutions. Paperkey should already be packaged for most distributions. Run the following command, replacing `[fpr]` with the full fingerprint of your key: $ gpg --export-secret-key [fpr] | paperkey > /tmp/key-backup.txt Print out that file, then take a pen and write your passphrase on the margin of the paper. **This is strongly recommended** because the key printout is still encrypted with that passphrase, and if you ever change it you will not remember what it used to be when you had created the backup -- *guaranteed*. Put the resulting printout and the hand-written passphrase into an envelope and store in a secure and well-protected place, preferably away from your home, such as your bank vault. **NOTE ON PRINTERS**: Your printer is probably no longer a simple dumb device connected to your parallel port, but since the output is still encrypted with your passphrase, printing out even to "cloud-integrated" modern printers should be a relatively safe operation. Up to here ------------------------------------------------------------------------------ ## Generating PGP subkeys ### Checklist - [ ] Generate a 2048-bit Encryption subkey _(ESSENTIAL)_ - [ ] Generate a 2048-bit Signing subkey _(ESSENTIAL)_ - [ ] Generate a 2048-bit Authentication subkey _(NICE)_ - [ ] Upload your public keys to a PGP keyserver _(ESSENTIAL)_ - [ ] Set up a refresh cronjob _(ESSENTIAL)_ ### Considerations Now that we've created the master key, let's create the keys you'll actually be using for day-to-day work. We create 2048-bit keys because a lot of specialized hardware (we'll discuss this further) does not handle larger keys, but also for pragmatic reasons. If we ever find ourselves in a world where 2048-bit RSA keys are not considered good enough, it will be because of fundamental breakthroughs in computing or mathematics and therefore longer 4096-bit keys will not make much difference. #### Create the subkeys To create the subkeys, run: $ gpg --quick-add-key [fpr] rsa2048 encr $ gpg --quick-add-key [fpr] rsa2048 sign You can also create the Authentication key, which will allow you to use your PGP key for ssh purposes: $ gpg --quick-add-key [fpr] rsa2048 auth You can review your key information using `gpg --list-key [fpr]`: pub rsa4096 2017-12-06 [C] [expires: 2019-12-06] 111122223333444455556666AAAABBBBCCCCDDDD uid [ultimate] Alice Engineer uid [ultimate] Alice Engineer sub rsa2048 2017-12-06 [E] sub rsa2048 2017-12-06 [S] #### Upload your public keys to the keyserver Your key creation is complete, so now you need to make it easier for others to find it by uploading it to one of the public keyservers. (Do not do this step if you're just messing around and aren't planning on actually using the key you've created, as this just litters keyservers with useless data.) $ gpg --send-key [fpr] If this command does not succeed, you can try specifying the keyserver on a port that is most likely to work: $ gpg --keyserver hkp://pgp.mit.edu:80 --send-key [fpr] Most keyservers communicate with each-other, so your key information will eventually synchronize to all the others. **NOTE ON PRIVACY:** Keyservers are completely public and therefore, by design, leak potentially sensitive information about you, such as your full name, nicknames, and personal or work email addresses. If you sign other people's keys or someone signs yours, keyservers will additionally become leakers of your social connections. Once such personal information makes it to the keyservers, it becomes impossible to edit or delete. Even if you revoke a signature or identity, that does not delete them from your key record, just marks them as revoked -- making them stand out even more. That said, if you participate in software development on a public project, all of the above information is already public record, and therefore making it additionally available via keyservers does not result in a net loss in privacy. ##### Upload your public key to GitHub If you use GitHub in your development (and who doesn't?), you should upload your key following the instructions they have provided: - [Adding a PGP key to your GitHub account](https://help.github.com/articles/adding-a-new-gpg-key-to-your-github-account/) To generate the public key output suitable to paste in, just run: $ gpg --export --armor [fpr] #### Set up a refresh cronjob You will need to regularly refresh your keyring in order to get the latest changes on other people's public keys. You can set up a cronjob to do that: $ crontab -e Add the following on a new line: @daily /usr/bin/gpg2 --refresh >/dev/null 2>&1 **NOTE**: check the full path to your `gpg` or `gpg2` command and use the `gpg2` command if regular `gpg` for you is the legacy GnuPG v.1. ## Moving your master key to offline storage ### Checklist - [ ] Prepare encrypted detachable storage _(ESSENTIAL)_ - [ ] Back up your GnuPG directory _(ESSENTIAL)_ - [ ] Remove the master key from your home directory _(NICE)_ - [ ] Remove the revocation certificate from your home directory _(NICE)_ ### Considerations Why would you want to remove your master **[C]** key from your home directory? This is generally done to prevent your master key from being stolen or accidentally leaked. Private keys are tasty targets for malicious actors -- we know this from several successful malware attacks that scanned users' home directories and uploaded any private key content found there. It would be very damaging for any developer to have their PGP keys stolen -- in the Free Software world this is often tantamount to identity theft. Removing private keys from your home directory helps protect you from such events. #### Back up your GnuPG directory **!!!Do not skip this step!!!** It is important to have a readily available backup of your PGP keys should you need to recover them (this is different from the disaster-level preparedness we did with `paperkey`). #### Prepare detachable encrypted storage Start by getting a small USB "thumb" drive (preferably two!) that you will use for backup purposes. You will first need to encrypt them: - [Apple instructions](https://support.apple.com/kb/PH25745) - [Linux instructions](https://help.ubuntu.com/community/EncryptedFilesystemsOnRemovableStorage) For the encryption passphrase, you can use the same one as on your master key. #### Back up your GnuPG directory Once the encryption process is over, re-insert the USB drive and make sure it gets properly mounted. Find out the full mount point of the device, for example by running the `mount` command (under Linux, external media usually gets mounted under `/media/disk`, under Mac it's `/Volumes`). Once you know the full mount path, copy your entire GnuPG directory there: $ cp -rp ~/.gnupg [/media/disk/name]/gnupg-backup (Note: If you get any `Operation not supported on socket` errors, those are benign and you can ignore them.) You should now test to make sure everything still works: $ gpg --homedir=[/media/disk/name]/gnupg-backup --list-key [fpr] If you don't get any errors, then you should be good to go. Unmount the USB drive, distinctly label it so you don't blow it away next time you need to use a random USB drive, and put in a safe place -- but not too far away, because you'll need to use it every now and again for things like editing identities, adding or revoking subkeys, or signing other people's keys. #### Remove the master key Please see the previous section and make sure you have backed up your GnuPG directory in its entirety. What we are about to do will render your key useless if you do not have a usable backup! First, identify the keygrip of your master key: $ gpg --with-keygrip --list-key [fpr] The output will be something like this: pub rsa4096 2017-12-06 [C] [expires: 2019-12-06] 111122223333444455556666AAAABBBBCCCCDDDD Keygrip = AAAA999988887777666655554444333322221111 uid [ultimate] Alice Engineer uid [ultimate] Alice Engineer sub rsa2048 2017-12-06 [E] Keygrip = BBBB999988887777666655554444333322221111 sub rsa2048 2017-12-06 [S] Keygrip = CCCC999988887777666655554444333322221111 Find the keygrip entry that is beneath the `pub` line (right under the master key fingerprint). This will correspond directly to a file in your home `.gnupg` directory: $ cd ~/.gnupg/private-keys-v1.d $ ls AAAA999988887777666655554444333322221111.key BBBB999988887777666655554444333322221111.key CCCC999988887777666655554444333322221111.key All you have to do is simply remove the `.key` file that corresponds to the master keygrip: $ cd ~/.gnupg/private-keys-v1.d $ rm AAAA999988887777666655554444333322221111.key Now, if you issue the `--list-secret-keys` command, it will show that the master key is missing (the `#` indicates it is not available): $ gpg --list-secret-keys sec# rsa4096 2017-12-06 [C] [expires: 2019-12-06] 111122223333444455556666AAAABBBBCCCCDDDD uid [ultimate] Alice Engineer uid [ultimate] Alice Engineer ssb rsa2048 2017-12-06 [E] ssb rsa2048 2017-12-06 [S] #### Remove the revocation certificate Another file you should remove (but keep in backups) is the revocation certificate that was automatically created with your master key. A revocation certificate allows someone to permanently mark your key as revoked, meaning it can no longer be used or trusted for any purpose. You would normally use it to revoke a key that, for some reason, you can no longer control -- for example, if you had lost the key passphrase. Just as with the master key, if a revocation certificate leaks into malicious hands, it can be used to destroy your developer digital identity, so it's better to remove it from your home directory. cd ~/.gnupg/openpgp-revocs.d rm [fpr].rev ## Move the subkeys to a hardware device ### Checklist - [ ] Get a GnuPG-compatible hardware device _(NICE)_ - [ ] Configure the device to work with GnuPG _(NICE)_ - [ ] Set the user and admin PINs _(NICE)_ - [ ] Move your subkeys to the device _(NICE)_ ### Considerations Even though the master key is now safe from being leaked or stolen, the subkeys are still in the home directory. Anyone who manages to get their hands on those will be able to decrypt your communication or fake your signatures (if they know the passphrase, that is). The best way to completely protect your keys is to move them to a specialized hardware device that is capable of smartcard operations. #### The benefits of smartcards A smartcard contains a cryptographic chip that is capable of storing private keys and performing crypto operations directly on the card itself. Because the key contents never leave the smartcard, the operating system of the computer into which you plug in the hardware device is not able to retrieve the private keys themselves. This is very different from the encrypted USB storage device we used earlier for backup purposes -- while that USB device is plugged in and decrypted, the operating system is still able to access the private key contents. Using external encrypted USB media is not a substitute to having a smartcard-capable device. Some other benefits of smartcards: - they are relatively cheap and easy to obtain - they are small and easy to carry with you - they can be used with multiple devices - many of them are tamper-resistant (depends on manufacturer) #### Available smartcard devices Smartcards started out embedded into actual wallet-sized cards, which earned them their name. You can still buy and use GnuPG-capable smartcards, and they remain one of the cheapest available devices you can get. However, actual smartcards have one important downside: they require a smartcard reader, and very few laptops come with one. For this reason, manufacturers have started providing small USB devices, the size of a USB thumb drive or smaller, that either have the microsim-sized smartcard pre-inserted, or that simply implement the smartcard protocol features on the internal chip. Here are a few recommendations: - [Nitrokey Start](https://shop.nitrokey.com/shop/product/nitrokey-start-6): Open hardware and Free Software: one of the cheapest options for GnuPG use, but with fewest extra security features - [Nitrokey Pro](https://shop.nitrokey.com/shop/product/nitrokey-pro-3): Similar to the Nitrokey Start, but is tamper-resistant and offers more security features (but not U2F, see the Fido U2F section of the guide) - [Yubikey 4](https://www.yubico.com/product/yubikey-4-series/): Proprietary hardware and software, but cheaper than Nitrokey Pro and comes available in the USB-C form that is more useful with newer laptops; also offers additional security features such as U2F Our recommendation is to pick a device that is capable of both smartcard functionality and U2F, which, at the time of writing, means a Yubikey 4. #### Configuring your smartcard device Your smartcard device should Just Work (TM) the moment you plug it into any modern Linux or Mac workstation. You can verify it by running: $ gpg --card-status If you didn't get an error, but a full listing of the card details, then you are good to go. Unfortunately, troubleshooting all possible reasons why things may not be working for you is way beyond the scope of this guide. If you are having trouble getting the card to work with GnuPG, please seek support via your operating system's usual support channels. ##### PINs don't have to be numbers Note, that despite having the name "PIN" (and implying that it must be a "number"), neither the user PIN nor the admin PIN on the card need to be numbers. Your device will probably have default user and admin PINs set up when it arrives. For Yubikeys, these are `123456` and `12345678` respectively. If those don't work for you, please check any accompanying documentation that came with your device. ##### Quick setup To configure your smartcard, you will need to use the GnuPG menu system, as there are no convenient command-line switches: $ gpg --card-edit [...omitted...] gpg/card> admin Admin commands are allowed gpg/card> passwd You should set the user PIN (1), Admin PIN (3), and the Reset Code (4). Please make sure to record and store these in a safe place -- especially the Admin PIN and the Reset Code (which allows you to completely wipe the smartcard). You so rarely need to use the Admin PIN, that you will inevitably forget what it is if you do not record it. Getting back to the main card menu, you can also set other values (such as name, sex, login data, etc), but it's not necessary and will additionally leak information about your smartcard should you lose it. #### Moving the subkeys to your smartcard Exit the card menu (using "q") and save all changes. Next, let's move your subkeys onto the smartcard. You will need both your PGP key passphrase and the admin PIN of the card for most operations. Remember, that `[fpr]` stands for the full 40-character fingerprint of your key. $ gpg --edit-key [fpr] Secret subkeys are available. pub rsa4096/AAAABBBBCCCCDDDD created: 2017-12-07 expires: 2019-12-07 usage: C trust: ultimate validity: ultimate ssb rsa2048/1111222233334444 created: 2017-12-07 expires: never usage: E ssb rsa2048/5555666677778888 created: 2017-12-07 expires: never usage: S [ultimate] (1). Alice Engineer [ultimate] (2) Alice Engineer gpg> Using `--edit-key` puts us into the menu mode again, and you will notice that the key listing is a little different. From here on, all commands are done from inside this menu mode, as indicated by `gpg>`. First, let's select the key we'll be putting onto the card -- you do this by typing `key 1` (it's the first one in the listing, our **[E]** subkey): gpg> key 1 The output should be subtly different: pub rsa4096/AAAABBBBCCCCDDDD created: 2017-12-07 expires: 2019-12-07 usage: C trust: ultimate validity: ultimate ssb* rsa2048/1111222233334444 created: 2017-12-07 expires: never usage: E ssb rsa2048/5555666677778888 created: 2017-12-07 expires: never usage: S [ultimate] (1). Alice Engineer [ultimate] (2) Alice Engineer Notice the `*` that is next to the `ssb` line corresponding to the key -- it indicates that the key is currently "selected." It works as a toggle, meaning that if you type `key 1` again, the `*` will disappear and the key will not be selected any more. Now, let's move that key onto the smartcard: gpg> keytocard Please select where to store the key: (2) Encryption key Your selection? 2 Since it's our **[E]** key, it makes sense to put it into the Encryption slot. When you submit your selection, you will be prompted first for your PGP key passphrase, and then for the admin PIN. If the command returns without an error, your key has been moved. **Important**: Now type `key 1` again to unselect the first key, and `key 2` to select the **[S]** key: gpg> key 1 gpg> key 2 gpg> keytocard Please select where to store the key: (1) Signature key (3) Authentication key Your selection? 1 You can use the **[S]** key both for Signature and Authentication, but we want to make sure it's in the Signature slot, so choose (1). Once again, if your command returns without an error, then the operation was successful. Finally, if you created an **[A]** key, you can move it to the card as well, making sure first to unselect `key 2`. Once you're done, choose "q": gpg> q Save changes? (y/N) y Saving the changes will delete the keys you moved to the card from your home directory (but it's okay, because we have them in our backups should we need to do this again for a replacement smartcard). ##### Verifying that the keys were moved If you perform `--list-secret-keys` now, you will see a subtle difference in the output: $ gpg --list-secret-keys sec# rsa4096 2017-12-06 [C] [expires: 2019-12-06] 111122223333444455556666AAAABBBBCCCCDDDD uid [ultimate] Alice Engineer uid [ultimate] Alice Engineer ssb> rsa2048 2017-12-06 [E] ssb> rsa2048 2017-12-06 [S] The `>` in the `ssb>` output indicates that the subkey is only available on the smartcard. If you go back into your secret keys directory and look at the contents there, you will notice that the `.key` files there have been replaced with stubs: $ cd ~/.gnupg/private-keys-v1.d $ strings *.key The output should contain `shadowed-private-key` to indicate that these files are only stubs and the actual content is on the smartcard. #### Verifying that the smartcard is functioning To verify that the smartcard is working as intended, you can create a signature: $ echo "Hello world" | gpg --clearsign > /tmp/test.asc $ gpg --verify /tmp/test.asc This should ask for your smartcard PIN on your first command, and then show "Good signature" after you run `gpg --verify`. Congratulations, you have successfully made it extremely difficult to steal your digital developer identity! ### Other common GnuPG operations Here is a quick reference for some common operations you'll need to do with your PGP key. In all of the below commands, the `[fpr]` is your key fingerprint. #### Mounting your master key offline storage You will need your master key for any of the operations below, so you will first need to mount your backup offline storage and tell GnuPG to use it. First, find out where the media got mounted, e.g. by looking at the output of the `mount` command. Then, locate the directory with the backup of your GnuPG directory and tell GnuPG to use that as its home: $ export GNUPGHOME=/media/disk/name/gnupg-backup $ gpg --list-secret-keys You want to make sure that you see `sec` and not `sec#` in the output (the `#` means the key is not available and you're still using your regular home directory location). ##### Updating your regular GnuPG working directory After you make any changes to your key using the offline storage, you will want to import these changes back into your regular working directory: $ gpg --export | gpg --homedir ~/.gnupg --import $ unset GNUPGHOME #### Extending key expiration date The master key we created has the default expiration date of 2 years from the date of creation. This is done both for security reasons and to make obsolete keys eventually disappear from keyservers. To extend the expiration on your key by a year from current date, just run: $ gpg --quick-set-expire [fpr] 1y You can also use a specific date if that is easier to remember (e.g. your birthday, January 1st, or Canada Day): $ gpg --quick-set-expire [fpr] 2020-07-01 Remember to send the updated key back to keyservers: $ gpg --send-key [fpr] #### Revoking identities If you need to revoke an identity (e.g. you changed employers and your old email address is no longer valid), you can use a one-liner: $ gpg --quick-revoke-uid [fpr] 'Alice Engineer ' You can also do the same with the menu mode using `gpg --edit-key [fpr]`. Once you are done, remember to send the updated key back to keyservers: $ gpg --send-key [fpr] ## Using PGP with Git One of the core features of Git is its decentralized nature -- once a repository is cloned to your system, you have full history of the project, including all of its tags, commits and branches. However, with hundreds of cloned repositories floating around, how does anyone verify that the repository you downloaded has not been tampered with by a malicious third party? You may have cloned it from GitHub or some other official-looking location, but what if someone had managed to trick you? Or what happens if a backdoor is discovered in one of the projects you've worked on, and the "Author" line in the commit says it was done by you, while you're pretty sure you had [nothing to do with it](https://github.com/jayphelps/git-blame-someone-else)? To address both of these issues, Git introduced PGP integration. Signed tags prove the repository integrity by assuring that its contents are exactly the same as on the workstation of the developer who created the tag, while signed commits make it nearly impossible for someone to impersonate you without having access to your PGP keys. ### Checklist - [ ] Understand signed tags, commits, and pushes _(ESSENTIAL)_ - [ ] Configure git to use your key _(ESSENTIAL)_ - [ ] Learn how tag signing and verification works _(ESSENTIAL)_ - [ ] Configure git to always sign annotated tags _(NICE)_ - [ ] Learn how commit signing and verification works _(ESSENTIAL)_ - [ ] Configure git to always sign commits _(NICE)_ - [ ] Configure gpg-agent options _(ESSENTIAL)_ ### Considerations Git implements multiple levels of integration with PGP, first starting with signed tags, then introducing signed commits, and finally adding support for signed pushes. #### Understanding Git Hashes Git is a complicated beast, but you need to know what a "hash" is in order to have a good grasp on how PGP integrates with it. We'll narrow it down to two kinds of hashes: tree hashes and commit hashes. ##### Tree hashes Every time you commit a change to a repository, git records checksum hashes of all objects in it -- contents (blobs), directories (trees), file names and permissions, etc, for each subdirectory in the repository. It only does this for trees and blobs that have changed with each commit, so as not to re-checksum the entire tree unnecessarily if only a small part of it was touched. Then it calculates and stores the checksum of the toplevel tree, which will inevitably be different if any part of the repository has changed. ##### Commit hashes Once the tree hash has been created, git will calculate the commit hash, which will include the following information about the repository and the change being made: - the checksum hash of the tree - the checksum hash of the tree before the change (parent) - information about the author (name, email, time of authorship) - information about the committer (name, email, time of commit) - the commit message ##### Hashing function At the time of writing, git still uses the SHA1 hashing mechanism to calculate checksums, though work is under way to transition to a stronger algorithm that is more resistant to collisions. Note, that git already includes collision avoidance routines, so it is believed that a successful collision attack against git remains impractical. #### Annotated tags and tag signatures Git tags allow developers to mark specific commits in the history of each git repository. Tags can be "lightweight" -- more or less just a pointer at a specific commit, or they can be "annotated," which becomes its own object in the git tree. An annotated tag object contains all of the following information: - the checksum hash of the commit being tagged - the tag name - information about the tagger (name, email, time of tagging) - the tag message A PGP-signed tag is simply an annotated tag with all these entries wrapped around in a PGP signature. When a developer signs their git tag, they effectively assure you of the following: - who they are (and why you should trust them) - what the state of their repository was at the time of signing: - the tag includes the hash of the commit - the commit hash includes the hash of the toplevel tree - which includes hashes of all files, contents, and subtrees - it also includes all information about authorship - including exact times when changes were made When you clone a git repository and verify a signed tag, that gives you cryptographic assurance that _all contents in the repository, including all of its history, are exactly the same as the contents of the repository on the developer's computer at the time of signing_. #### Signed commits Signed commits are very similar to signed tags -- the contents of the commit object are PGP-signed instead of the contents of the tag object. A commit signature also gives you full verifiable information about the state of the developer's tree at the time the signature was made. Tag signatures and commit PGP signatures provide exact same security assurances about the repository and its entire history. #### Signed pushes This is included here for completeness' sake, since this functionality needs to be enabled on the server receiving the push before it does anything useful. As we saw above, PGP-signing a git object gives verifiable information about the developer's git tree, but not about their *intent* for that tree. For example, you can be working on an experimental branch in your own git fork trying out a promising cool feature, but after you submit your work for review, someone finds a nasty bug in your code. Since your commits are properly signed, someone can take the branch containing your nasty bug and push it into master, introducing a vulnerability that was never intended to go into production. Since the commit is properly signed with your key, everything looks legitimate and your reputation is questioned when the bug is discovered. Ability to require PGP-signatures during `git push` was added in order to certify the *intent* of the commit, and not merely verify its contents. #### Configure git to use your PGP key If you only have one secret key in your keyring, then you don't really need to do anything extra, as it becomes your default key. However, if you happen to have multiple secret keys, you can tell git which key should be used (`[fpr]` is the fingerprint of your key): $ git config --global user.signingKey [fpr] **NOTE**: If you have a distinct `gpg2` command, then you should tell git to always use it instead of the legacy `gpg` from version 1: $ git config --global gpg.program gpg2 #### How to work with signed tags To create a signed tag, simply pass the `-s` switch to the tag command: $ git tag -s [tagname] Our recommendation is to always sign git tags, as this allows other developers to ensure that the git repository they are working with has not been maliciously altered (e.g. in order to introduce backdoors). ##### How to verify signed tags To verify a signed tag, simply use the `verify-tag` command: $ git verify-tag [tagname] If you are verifying someone else's git tag, then you will need to import their PGP key. Please refer to the "Trusted Team communication" document in the same repository for guidance on this topic. ##### Verifying at pull time If you are pulling a tag from another fork of the project repository, git should automatically verify the signature at the tip you're pulling and show you the results during the merge operation: $ git pull [url] tags/sometag The merge message will contain something like this: Merge tag 'sometag' of [url] [Tag message] # gpg: Signature made [...] # gpg: Good signature from [...] #### Configure git to always sign annotated tags Chances are, if you're creating an annotated tag, you'll want to sign it. To force git to always sign annotated tags, you can set a global configuration option: $ git config --global tag.forceSignAnnotated true Alternatively, you can just train your muscle memory to always pass the `-s` switch: $ git tag -asm "Tag message" tagname #### How to work with signed commits It is easy to create signed commits, but it is much more difficult to incorporate them into your workflow. Many projects use signed commits as a sort of "Committed-by:" line equivalent that records code provenance -- the signatures are rarely verified by others except when tracking down project history. In a sense, signed commits are used for "tamper evidence," and not to "tamper-proof" the git workflow. To create a signed commit, you just need to pass the `-S` flag to the `git commit` command (it's capital `-S` due to collision with another flag): $ git commit -S Our recommendation is to always sign commits and to require them of all project members, regardless of whether anyone is verifying them (that can always come at a later time). ##### How to verify signed commits To verify a single commit you can use `verify-commit`: $ git verify-commit [hash] You can also look at repository logs and request that all commit signatures are verified and shown: $ git log --pretty=short --show-signature ##### Verifying commits during git merge If all members of your project sign their commits, you can enforce signature checking at merge time (and then sign the resulting merge commit itself using the `-S` flag): $ git merge --verify-signatures -S merged-branch Note, that the merge will fail if there is even one commit that is not signed or does not pass verification. As it is often the case, technology is the easy part -- the human side of the equation is what makes adopting strict commit signing for your project difficult. ##### If your project uses mailing lists for patch management If your project uses a mailing list for submitting and processing patches, then there is little use in signing commits, because all signature information will be lost when sent through that medium. It is still useful to sign your commits, just so others can refer to your publicly hosted git trees for reference, but the upstream project receiving your patches will not be able to verify them directly with git. You can still sign the emails containing the patches, though. #### Configure git to always sign commits You can tell git to always sign commits: git config --global commit.gpgSign true Or you can train your muscle memory to always pass the `-S` flag to all `git commit` operations (this includes `--amend`). ##### Bonus: Using gpg-agent with ssh If you've created an **[A]** (Authentication) key and moved it to the smartcard, you can use it with ssh for adding 2-factor authentication for your ssh sessions. You just need to tell your environment to use the correct socket file for talking to the agent. First, add the following to your `~/.gnupg/gpg-agent.conf`: enable-ssh-support Then, add this to your `.bashrc`: export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket) You will need to kill the existing `gpg-agent` process and start a new login session for the changes to take effect: $ killall gpg-agent $ bash $ ssh-add -L The last command should list the SSH representation of your PGP Auth key (the comment should say `cardno:XXXXXXXX` at the end to indicate it's coming from the smartcard). To enable key-based logins with ssh, just add the `ssh-add -L` output to `~/.ssh/authorized_keys` on remote systems you log in to. Congratulations, you've just made your ssh credentials extremely difficult to steal. As a bonus, you can get other people's PGP-based ssh keys from public keyservers, should you need to grant them ssh access to anything: $ gpg --export-ssh-key [keyid] This can come in super handy if you need to allow developers access to git repositories over ssh. ## Protecting online accounts ### Checklist - [ ] Get a U2F-capable device _(ESSENTIAL)_ - [ ] Enable 2-factor authentication for your online accounts _(ESSENTIAL)_ - [ ] GitHub/GitLab - [ ] Google - [ ] Social Media - [ ] Use U2F as primary mechanism, with TOTP as fallback _(ESSENTIAL)_ ### Considerations You may have noticed how a lot of your online developer identity is tied to your email address. If someone can gain access to your mailbox, they would be able to do a lot of damage to you personally, and to your reputation as a free software developer. Protecting your email accounts is just as important as protecting your PGP keys. #### Two-factor authentication with Fido U2F [Two-factor authentication](https://en.wikipedia.org/wiki/Multi-factor_authentication) is a mechanism to improve account security by requiring a physical token in addition to a username and password. The goal is to make sure that even if someone steals your password (via keylogging, shoulder surfing, or other means), they still wouldn't be able to gain access to your account without having in their possession a specific physical device ("something you have" factor). The most widely known mechanisms for 2-factor authentication are: - SMS-based verification - Time-based One-Time Passwords (TOTP) via a smartphone app, such as the "Google Authenticator" or similar solutions - Hardware tokens supporting Fido U2F SMS-based verification is easiest to configure, but has the following important downsides: it is useless in areas without signal (e.g. most building basements), and can be defeated if the attacker is able to intercept or divert SMS messages, for example by cloning your SIM card. TOTP-based multi-factor authentication offers more protection than SMS, but has important scaling downsides (there are only so many tokens you can add to your smartphone app before finding the correct one becomes unwieldy). Plus, there's no avoiding the fact that your secret key ends up stored on the smartphone itself -- which is a complex, globally connected device that may or may not have been receiving timely security patches from the manufacturer. Most importantly, neither TOTP nor SMS methods protect you from phishing attacks -- if the phisher is able to steal both your account password and the 2-factor token, they can replay them on the legitimate site and gain access to your account. [Fido U2F](https://en.wikipedia.org/wiki/Universal_2nd_Factor) is a standard developed specifically to provide a mechanism for 2-factor authentication *and* to combat credential phishing. The U2F protocol will store each site's unique key on the USB token and will prevent you from accidentally giving the attacker both your password and your one-time token if you try to use it on anything other than the legitimate website. Both Chrome and Firefox support U2F 2-factor authentication, and hopefully other browsers will soon follow. #### Get a token capable of Fido U2F There are [many options available](http://www.dongleauth.info/dongles/) for hardware tokens with Fido U2F support, but if you're already ordering a smartcard-capable physical device, then your best option is a Yubikey 4, which supports both. #### Enable 2-factor authentication on your online accounts You definitely want to enable this option on the email provider you are using (especially if it is Google, which has excellent support for U2F). Other sites where this functionality should be enabled are: - **GitHub**: it probably occurred to you when you uploaded your PGP public key that if anyone else is able to gain access to your account, they can replace your key with their own. If you publish code on GitHub, you should take care of your account security by protecting it with U2F-backed authentication. - **GitLab**: for the same reasons as above. - **Google**: if you have a google account, you will be surprised how many sites allow logging in with Google authentication instead of site-specific credentials. - **Facebook**: same as above, a lot of online sites offer the option to authenticate using a Facebook account. You should 2-factor protect your Facebook account even if you do not use it. - Other sites, as you deem necessary. See [dongleauth.info](http://www.dongleauth.info) for inspiration. #### Configure TOTP failover, if possible Many sites will allow you to configure multiple 2-factor mechanisms, and the recommended setup is: - U2F token as the primary mechanism - TOTP phone app as the secondary mechanism This way, even if you lose your U2F token, you should be able to re-gain access to your account. Alternatively, you can enroll multiple U2F tokens (e.g. you can get another cheap token that only does U2F and use it for backup reasons). ## Further reading By this point you have accomplished the following important tasks: 1. Created your developer identity and protected it using PGP cryptography. 2. Configured your environment so your identity is not easily stolen by moving your master key offline and your subkeys to an external hardware device. 3. Configured your git environment to ensure that anyone using your project is able to verify the integrity of the repository and its entire history. 4. Secured your online accounts using 2-factor authentication. You are already in a good place, but you should also read up on the following topics: - How to secure your team communication (see the document in this repository). Decisions regarding your project development and governance require just as much careful protection as any committed code, if not so. Make sure that your team communication is trusted and the integrity of all decisions is verified. - How to secure your workstation (see the document in this repository). Your goal is to minimize risky behaviour that would cause your project code to be contaminated, or your developer identity to be stolen. - How to write secure code (see various documentation related to the programming languages and libraries used by your project). Bad, insecure code is still bad, insecure code even if there is a PGP signature on the commit that introduced it.